Superporous agarose beads as a hydrophobic interaction chromatography support

Superporous agarose beads were used as a support for hydrophobic interaction chromatography. These beads have large connecting flow pores in addition to their normal diffusion pores. The flow pores, which are approximately one fifth of the overall diameter of the superporous agarose beads, were earlier shown to give the beads improved mass transfer properties relative to homogeneous agarose beads (Gustavsson and Larsson, J. Chromatogr. A, 734 (1996) 231–240). Superporous agarose beads and homogeneous agarose beads of the same particle size range (106–180 μm) were derivatized with phenyl groups. The properties of the superporous beads were then compared with the homogeneous beads in the separation of a mixture of three model proteins (ribonuclease A, lysozyme and bovine serum albumin) at various superficial flow velocities from 30 to 600 cm/h. The superporous beads gave satisfactory separation at flow velocities five times higher than was possible for homogeneous beads. The performance of the two types of beads was also compared in the purification of lactate dehydrogenase from a beef heart extract at a superficial flow velocity of 150 cm/h. The superporous beads performed considerably better, leading to twice the purification factor and twice the concentration of the desired product. The results were interpreted using the theoretical treatment given by Carta and Rodrigues (Carta and Rodrigues, Chem. Eng. Sci., 48 (1993) 3927).     

Effect of bovine serum albumin on the surface properties of ionic liquid-type Gemini surfactant

The effect of bovine serum albumin on the surface properties of IL-type gemini surfactant ([C₁₀-4-C₁₀im]Br₂), have been investigated by surface tension method. The critical micelle concentration (CMC) as a function of BSA concentrations at various temperatures was investigated. The CMC of [C₁₀-4-C₁₀im]Br₂ increases with increasing the concentration of BSA as well as the temperature of the system. The interfacial parameters viz; maximum surface excess concentration (Γ_max), the minimum area per molecule (A_min), and surface pressure at CMC (Π_cmc) were calculated. In addition, thermodynamic parameters of adsorption and micellization were evaluated by using surface tension data. The results indicated that the binding of [C₁₀-4-C₁₀im]Br₂ to BSA is spontaneous and exothermic in nature. The process is entropy driven and hydrophobic interactions are the major driving forces.     

Switchable peptide-equipped protein/cucurbit[7]uril supramolecular assembly for targeted drug delivery

ABSTRACT

Herein, we develop a switchable peptide-equipped protein/cucurbit[7]uril (CB[7]) supramolecular assembly as novel targeted drug vector. Specifically, bovine serum albumin (BSA) is used to interact with CB[7], serving as the core of drug vector. Then, a peptide shield layer is formed on the surface of BSA/CB[7], yielding peptide-equipped supramolecular assembly (Pep@BSA@CB[7]). The equipped peptide shield layer is composed of switchable peptide probes consisting of a polycationic cell-penetrating peptide (CPP) motif, a polyanionic motif and a linking motif, and therefore provides a variety of desirable properties. First, the CPP motif displays excellent cell penetration ability and can facilitate internalisation of the drug vector. Secondly, the polyanionic motif performs intramolecular electrostatic interaction with CPP motif and thereby can reduce non-targeted delivery towards normal cells. Thirdly, the linking motif can be specifically cleaved by matrix metalloproteinases 2 that is up-regulated in tumour microenvironment, thus enabling precise cancer-targeting. As a consequent, Pep@BSA@CB[7] can serve as a promising drug vector that exhibits superior targeting ability and high uptake efficiency towards cancer cells, which may be of great potential in cancer-targeted treatment.     

Improved RP‐HPLC method for determination of bovine lactoferrin and its proteolytic degradation in simulated gastrointestinal fluids

The objective of this study was to qualitatively and quantitatively evaluate bovine lactoferrin (bLf) and its stability using a rapid RP‐HPLC method. bLf could be rapidly detected within 20 min and quantitated at levels down to 5 µg/mL, and the equation of linearity was y = 86.10x + 178.31 with the correlation coefficient (r²) 0.9997. Quantitative data obtained in the present study proved the improved RP‐HPLC method to be a sensitive and accurate analytical tool for bLf determination. The proteolytic cleavage of bLf in simulated human gastrointestinal fluids was further analyzed by RP‐HPLC, and found to follow pseudo‐first‐order kinetics. The typical equation obtained by pepsin was log₁₀ [A_t]/[A₀] = ?0.03x (r² = 0.85), and log₁₀ [A_t]/[A₀] = ?0.01x (r² = 0.81) for trypsin and chymotrypsin combination. Pepsinolysis of bLf in simulated gastric fluid was relatively fast with the half‐life t_1/2 23.1 min. The digestion of bLf in simulated intestinal fluid was slower with about a 3‐fold increase in half‐life (69.3 min). After the complete proteolysis of bLf, small cleaved peptide fragments were fully separated and identified by RP‐HPLC. The proteolytic study indicated that this validated RP‐HPLC was able to evaluate bLf stability though monitoring the derivatization products. Copyright © 2012 John Wiley & Sons, Ltd.     

Cyclic sample pooling using two‐dimensional liquid chromatography system enhances coverage in shotgun proteomics

We report a cyclic sample pooling technique devised in two‐dimensional liquid chromatography–electrospray ionization mass spectrometry (LC‐ESI‐MS) shotgun proteomics that renders deeper proteome coverage; we combined low pH reversed‐phase (RP) LC in trifluoroacetic acid in the first dimension, followed by cyclic sample pooling of the eluate and low‐pH RP‐LC in formic acid in the second dimension. The new protocol has a significantly higher resolving power suitable for LC‐ESI‐MS/MS shotgun proteomics. Copyright © 2013 John Wiley & Sons, Ltd.     

Analysis of toldimfos in porcine muscle and bovine milk using liquid chromatography–triple quadrupole mass spectrometry

An analytical method was developed for the detection of toldimfos sodium residues in porcine muscle and bovine milk using liquid chromatography–triple quadrupole tandem mass spectrometry (LC–MS/MS) analysis. The drug was extracted from muscle and milk using 10 mm ammonium formate in acetonitrile and then purified using n ‐hexane. The drug was well separated on a Luna C₁₈ column using a mixture of 10 mm ammonium formate in ultrapure water (A) and acetonitrile (B) as the mobile phase. Good linearity was achieved over the tested concentration range (0.005–0.03 mg/kg) in matrix‐matched standard calibration. The determination coefficients (R ² ) were 0.9942 and 0.9898 for muscle and milk, respectively. Fortified porcine muscle and bovine milk contained concentrations equivalent to and twice the limit of quantification (0.005 mg/kg) yielded recoveries in the range of 75.58–89.74% and relative standard deviations of ≤8.87%. Samples collected from large markets located in Seoul, Republic of Korea, tested negative for toldimfos sodium residue. In conclusion, ammonium formate in acetonitrile can effectively extract toldimfos sodium from porcine muscle and bovine milk without solid‐phase extraction, which is usually required for cleanup before analysis. This method can be applied for the routine analysis of toldimfos in foods of animal origins.     

Influence of Bovine Bone Content on In Vitro Degradation of Poly-L-lactic Acid and Bovine Bone Composite Materials

In vitro degradation experiments of poly-L-lactic acid (PLLA) and bovine bone (BB) composites were carried out in a phosphate-buffered solution (PBS) at 37°C with a pH of 7.4. The influence of BB content on pH value of PBS, water uptake, molecular weights, molecular weight distributions, weight losses, mechanical strengths, and morphologies of PLLA/BB was investigated with degradation times. The results indicated that the presence of the BB modified the degradation of the PLLA matrix. The degradation rate of PLLA in the PLLA/BB composite was slower than the degradation rate of the sole PLLA material. Furthermore, the degradation rate of the composites became slower with the increasing content of BB in PLLA/BB composites.     

Development and optimization of ultra-high performance supercritical fluid chromatography mass spectrometry method for high-throughput determination of tocopherols and tocotrienols in human serum

The goal of this study was to develop an effective supercritical fluid chromatography method using single quadrupole MS for analysis of all isomeric forms of vitamin E. Finally, two fast and effective methods, the high resolution one and the high speed one, for the determination of 8 vitamin E isomers in human serum were developed.     

Colorimetric and Spectrofluorimetric Methods for the Determination of Melatonin in Tablets and Serum

Abstract

Two sensitive and accurate colorimetric and spectrofluonmetric methods, are presented for the determination of melatonin in tablets and serum. The first method utilizes the reactions of p-dimethylaminobenzaldehyde in hydrochloric acid (van Urk reagent)-ferric chloride in sulphuric acid (Salkowski reagent) mixture. The blue color of the resulting reaction product is measured at 630 nm. The second method is based on the reaction of melatonin with o-phthalaldehyde in acid medium which yields highly fluorescent condensation product that is measured at 465 nm as emission wavelength, using excitation wavelength at 355 nm. No interference was observed from tableting additives, and the applicability of the methods was examined by analysing tablets containing melatonin (single and combined with pyridoxine). Mean percentage recoveries from tablets were found to be 99.9+0.31 for single and 100.5+0.15 for combined tablets using colorimetric method, while by applying spectrofluorimetric method the recoveries were found to be 100.610.41 for single and 100.2+0.39 for combined tablets. Furthermore, the proposed methods were extended to the in-vitro determination of melatonin in serum. The detection limits are 0.27 ug ml^?1 for colorimetric method and 0.00035 ug ml^?1 for spectrofluorimetric method.     

Enhanced electron transfer by bovine serum albumin covalently attached to glassy carbon electrode and its application to determination of hydroquinone

Bovine serum albumin (BSA) was covalently attached to glassy carbon electrode (GCE) surface by the electrochemical method. An enhancement for the redox of hydroquinone (HQ) on BSA/GCE was confirmed by cyclic voltammetry and electrochemical impedance spectroscopy measurement. The electron transfer rate constant (k _s) on the BSA/GCE electrode is almost three orders of magnitude higher than that on bare GCE. The enhancing effect can be attributed to the electrostatic force between the positively charged HQ and negatively charged BSA. It is found that the enhanced redox process of HQ can be used to determine HQ sensitively. The oxidation current can reach 95% of its steady-state value within 30 s. The linear range for HQ determination is from 2.5 × 10^?8 M to 1.325 × 10^?6 M with a detection limit of 8.6 × 10^?9 M at a signal-to-noise ratio of 3. The study may provide a simple, rapid and sensitive method for determination of HQ which is present in the natural environment and in chemical industry effluent.